WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed.

Name of Product: Oceanic and AERIS SCUBA Regulator First Stages

Units: About 6,000

Manufacturer: ROMI Enterprises, of San Leandro, Calif.

Hazard: An internal component that seals air between the high pressure first-stage and the intermediate pressure second-stage can fail. This can result in uncontrolled flow of air to the diver and pose a risk of serious injury or death.

Incidents/Injuries: ROMI has received two reports of units malfunctioning during diving and six reports of units malfunctioning while being tested by dealers prior to delivery to consumers. No injuries reported.

Description and Models: The recall involves the following regulator first stages:

The model and serial numbers are stamped on the side of the body or on the body’s rubber covering.

Sold at: The items were either sold or repaired at authorized Oceanic and AERIS retailers nationwide from May 2006 through October 2007. The items sold for between $300 and $500.

Manufactured in: United States and Taiwan

Remedy: Consumers should immediately stop using the recalled regulator first stages and take them to any authorized Oceanic or AERIS dealer for a free replacement part.

Consumer Contact: For further information or to determine if your specific unit is affected, contact ROMI toll-free at (888) 636-9390 between 8 a.m. and 5 p.m. PT Monday through Friday. Oceanic customers can send an e-mail to service@oceanicusa.com or visit the firm’s Web site at www.oceanicworldwide.com. AERIS customers can send an e-mail to info@diveaeris.com or visit the firm’s Web site at www.diveaeris.com

Oceanic CDX5

Oceanic FDX10

AERIS AT400

WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed.Name of Product: AGA Swivels for Scuba Diving Masks

Units: About 1,500

Manufacturer: M&J Engineering, of Poway, Calif.

Hazard: The swivel, which is attached to a diving mask, could separate while diving. This will result in a sudden loss of the diver’s air supply, causing the diver to engage in emergency ascent. This poses a risk of decompression sickness due to rapid ascent or drowning.

Incidents/Injuries: M&J Engineering has received one report of swivels separating from the masks while diving. No injuries have been reported.

Description: This recall involves all SW-3000 2nd stage 360-degree swivels for scuba diving masks manufactured between January 2004 and February 2005. The swivel has the date stamped on its body, below the patent number. Swivels that are already repaired have an arrow stamped on the top right corner of the swivel body.

Sold at: Diving retail stores nationwide between January 2004 and February 2005 for about $60.

Manufactured in: USA

Remedy: Consumers should immediately stop using the scuba diving masks with the swivel attached and contact M&J Engineering to receive a free repair.

Consumer Contact: For additional information, contact M&J Engineering toll-free at (888) 794-8351 Monday through Friday between 8 a.m. to 5 p.m. PT, e-mail sales@omniswivel.com, or visit the company’s Web site at www.mj-engineering.com

WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Scubapro of Sturtevant, Wis., a division of Johnson Worldwide Associates Inc., is recalling about 1,800 G500 second stage regulators used in scuba diving. The VIVA control knobs on these regulators can detach during a dive allowing water to rush into the regulator, which could result in a diver drowning.

Scubapro has received six reports of the VIVA control knob detaching from the regulator, two of which occurred during a dive. No injuries have been reported.

The G500 second stage regulators involved in this recall have serial numbers less than or equal to 13497450. The serial number is located on the bottom face of the exhaust manifold.

These products were sold in diving specialty stores nationwide from March 1997 through June 1997 for around $300.

Consumers should immediately stop using G500 second stage regulators involved in this recall and contact their local, authorized Scubapro dealer to arrange for a free replacement of the VIVA control knob. All other questions should be directed to Scubapro at (800) 382-2211 between 7 a.m. and 5 p.m. PT Monday through Friday. Under no circumstances should consumers dive with these regulators until they have been repaired.